degrees. Seventeen degrees on the F1 and F3 mounts allows the Dish to
rotate 360+ degrees in azimuth without the LNB Arm Assembly hitting
objects on the roof of the vehicle.
Once the Dish has been mounted on the roof or platform this value can be
lowered as necessary as long as full Azimuth Rotation will not cause the
LNB to hit objects in this rotation. Typically 17 degrees will work for
most of US and Southern Canada.
Background Peak (Disabled)
Disabled
When disabled the dish remains pointed in a fixed position. Any
movement caused by wind or vehicle repositioning is ignored.
Enabled
When Enabled the D3 Controller will monitor DVB Signals and/or
Modem Signal Data to try to maintain a peak at the Target Satellite. This
will usually mean fine adjustments of Azimuth and Elevation to the Dish.
Note: This is NOT an “Inmotion” routine are may not keep up positioning
in a real time situation. There may be some signal degradation if
movement of the Dish is too rapid.
Dish Light (Enabled)
Enabled
Under normal use when the Dish Light is Enabled the DataStorm Dish
will have a glowing Blue reflection off of the Dish surface when the dish
is deployed. When the Dish is stowed this light will be off.
Disabled
If the user chooses to have this light off all the time simply disable this
feature.
Manual Sat ID (Disabled)
Disabled
Comentarios a estos manuales